 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD- 95559 IRF7473PBF Applications l Telecom and Data-Com 24 and 48V input DC-DC converters l Motor Control l Uninterrutible Power Supply l Lead-Free Benefits l Ultra Low On-Resistance l High Speed Switching l Low Gate Drive Current Due to Improved Gate Charge Characteristic l Improved Avalanche Ruggedness and Dynamic dv/dt l Fully Characterized Avalanche Voltage and Current Typical SMPS Topologies l Full and Half Bridge 48V input Circuit l Forward 24V input Circuit Absolute Maximum Ratings Parameter ID @ TA = 25C ID @ TA = 70C IDM PD @TA = 25C VGS dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds HEXFET(R) Power MOSFET VDSS 100V RDS(on) max 26mW@VGS = 10V ID 6.9A S S S G 1 8 A A D D D D 2 7 3 6 4 5 Top View SO-8 Max. 6.9 5.5 55 2.5 0.02 20 5.8 -55 to + 150 300 (1.6mm from case ) Units A W W/C V V/ns C Thermal Resistance Symbol RJL RJA Parameter Junction-to-Drain Lead Junction-to-Ambient Typ. --- --- Max. 20 50 Units C/W Notes through are on page 8 www.irf.com 1 8/17/04 IRF7473PBF Static @ TJ = 25C (unless otherwise specified) Parameter Drain-to-Source Breakdown Voltage V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) Gate Threshold Voltage V(BR)DSS IDSS IGSS Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Min. 100 --- --- 3.5 --- --- --- --- Typ. --- 0.11 22 --- --- --- --- --- Max. Units Conditions --- V VGS = 0V, ID = 250A --- V/C Reference to 25C, ID = 1mA 26 m VGS = 10V, ID = 4.1A 5.5 V VDS = VGS, ID = 250A 1.0 VDS = 95V, VGS = 0V A 250 VDS = 80V, VGS = 0V, TJ = 150C 100 VGS = 20V nA -100 VGS = -20V Dynamic @ TJ = 25C (unless otherwise specified) gfs Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Coss Coss Coss eff. Parameter Forward Transconductance Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Min. 10 --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- 61 21 19 24 20 29 11 3180 230 120 830 150 230 Max. Units Conditions --- S VDS = 50V, ID = 4.1A --- ID = 4.1A --- nC VDS = 50V --- VGS = 10V, --- VDD = 50V --- ID = 4.1A ns --- RG = 6.0 --- VGS = 10V --- VGS = 0V --- VDS = 25V --- pF = 1.0MHz --- VGS = 0V, VDS = 1.0V, = 1.0MHz --- VGS = 0V, VDS = 80V, = 1.0MHz --- VGS = 0V, VDS = 0V to 80V Avalanche Characteristics Parameter EAS IAR Single Pulse Avalanche Energy Avalanche Current Typ. --- --- Max. 140 4.1 Units mJ A Diode Characteristics IS ISM VSD trr Qrr Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Min. Typ. Max. Units --- --- --- --- --- --- --- --- 55 140 2.3 A 55 1.3 --- --- V ns nC Conditions MOSFET symbol showing the G integral reverse p-n junction diode. TJ = 25C, IS = 4.1A, VGS = 0V TJ = 25C, IF = 4.1A di/dt = 100A/s D S 2 www.irf.com IRF7473PBF 1000 VGS TOP 15V 12V 10V 8.0V 7.0V 6.5V 6.0V BOTTOM 5.5V 1000 100 I D , Drain-to-Source Current (A) ID, Drain-to-Source Current (A) 100 VGS 15V 12V 10V 8.0V 7.0V 6.5V 6.0V BOTTOM 5.5V TOP 10 10 1 6.0V 0.1 1 5.5V 0.01 0.1 1 20s PULSE WIDTH Tj = 25C 10 100 0.1 0.1 20s PULSE WIDTH TJ = 150 C 1 10 100 VDS, Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 1000 2.5 100 RDS(on) , Drain-to-Source On Resistance (Normalized) ID = 6.9A I D , Drain-to-Source Current (A) 2.0 TJ = 150 C 10 1.5 1 1.0 TJ = 25 C 0.1 V DS = 25V 20s PULSE WIDTH 5 6 7 8 9 10 11 12 0.5 0.01 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRF7473PBF 100000 20 VGS , Gate-to-Source Voltage (V) VGS = 0V, f = 1 MHZ Ciss = C + Cgd, C gs ds SHORTED Crss = C gd Coss = C + C ds gd ID = 4.1A VDS = 80V VDS = 50V VDS = 20V 16 10000 C, Capacitance(pF) Ciss 1000 12 Coss Crss 8 100 4 10 1 10 100 0 0 20 40 60 80 100 VDS, Drain-to-Source Voltage (V) QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 100 1000 OPERATION IN THIS AREA LIMITED BY R DS(on) ID, Drain-to-Source Current (A) ISD , Reverse Drain Current (A) 100 10 TJ = 150 C TJ = 25 C 1 10 100sec 1 Tc = 25C Tj = 150C Single Pulse 0.1 1 10 1msec 10msec 100 1000 0.1 0.0 V GS = 0 V 0.4 0.8 1.2 1.6 0.1 VSD ,Source-to-Drain Voltage (V) VDS , Drain-toSource Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRF7473PBF 8.0 VDS VGS 6.0 RD ID , Drain Current (A) RG 10V Pulse Width 1 s Duty Factor 0.1 % D.U.T. + -V DD 4.0 2.0 Fig 10a. Switching Time Test Circuit VDS 90% 0.0 25 50 75 100 125 150 TC , Case Temperature ( C) Fig 9. Maximum Drain Current Vs. Ambient Temperature 10% VGS td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms 100 Thermal Response (Z thJA ) D = 0.50 10 0.20 0.10 0.05 1 0.02 0.01 PDM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJA + TA 0.0001 0.001 0.01 0.1 1 10 100 0.1 0.01 0.00001 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient www.irf.com 5 IRF7473PBF RDS ( on) , Drain-to-Source On Resistance ( ) 0.028 RDS(on) , Drain-to -Source On Resistance () 0.035 0.026 0.030 VGS = 10V 0.024 0.025 ID = 6.9A 0.022 0 20 40 60 0.020 6.0 8.0 10.0 12.0 14.0 16.0 ID , Drain Current (A) VGS, Gate -to -Source Voltage (V) Fig 12. On-Resistance Vs. Drain Current Current Regulator Same Type as D.U.T. Fig 13. On-Resistance Vs. Gate Voltage 50K 12V .2F .3F VGS QGS D.U.T. + V - DS QG QGD 400 VG EAS , Single Pulse Avalanche Energy (mJ) VGS 3mA TOP BOTTOM 300 Charge IG ID ID 1.8A 3.3A 4.1A Current Sampling Resistors Fig 14a&b. Basic Gate Charge Test Circuit and Waveform 200 15V 100 V(BR)DSS tp VDS L DRIVER RG 20V 10V D.U.T IAS tp + V - DD 0 25 50 75 100 125 150 A 0.01 I AS Starting TJ , Junction Temperature ( C) Fig 15a&b. Unclamped Inductive Test circuit and Waveforms Fig 15c. Maximum Avalanche Energy Vs. Drain Current 6 www.irf.com IRF7473PBF SO-8 Package Outline Dimensions are shown in millimeters (inches) D A 5 B DIM A b INCHES MIN .0532 .013 .0075 .189 .1497 MAX .0688 .0098 .020 .0098 .1968 .1574 MILLIMETERS MIN 1.35 0.10 0.33 0.19 4.80 3.80 MAX 1.75 0.25 0.51 0.25 5.00 4.00 A1 .0040 8 6 E 1 7 6 5 H 0.25 [.010] A c D E e e1 H K L y 2 3 4 .050 BASIC .025 BASIC .2284 .0099 .016 0 .2440 .0196 .050 8 1.27 BASIC 0.635 BASIC 5.80 0.25 0.40 0 6.20 0.50 1.27 8 6X e e1 A C 0.10 [.004] 8X b 0.25 [.010] A1 CAB y K x 45 8X L 7 8X c NOT ES : 1. DIMENS IONING & TOLERANCING PER ASME Y14.5M-1994. 2. CONT ROLLING DIMENS ION: MILLIMET ER 3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES]. 4. OUTLINE CONFORMS TO JEDEC OUTLINE MS -012AA. 5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROTRUS IONS NOT TO EXCEED 0.15 [.006]. 6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROTRUS IONS NOT TO EXCEED 0.25 [.010]. 7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING TO A S UBST RAT E. 3X 1.27 [.050] F OOTPRINT 8X 0.72 [.028] 6.46 [.255] 8X 1.78 [.070] SO-8 Part Marking EXAMPLE: T HIS IS AN IRF7101 (MOS FET ) DAT E CODE (YWW) P = DES IGNAT ES LEAD-FREE PRODUCT (OPT IONAL) Y = LAS T DIGIT OF T HE YEAR WW = WEEK A = AS S EMBLY S IT E CODE LOT CODE PART NUMBER INT ERNAT IONAL RECT IFIER LOGO XXXX F7101 www.irf.com 7 IRF7473PBF SO-8 Tape and Reel Dimensions are shown in millimeters (inches) TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Notes: Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25C, L = 16mH RG = 25, IAS = 4.1A. When mounted on 1 inch square copper board Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS ISD 4.1A, di/dt 210A/s, VDD V(BR)DSS, TJ 150C Pulse width 400s; duty cycle 2%. Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.08/04 8 www.irf.com |
Price & Availability of IRF7473PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |